Ensim

The ELT Vibrating level switch has piezo-electric crystalls inside the tuning rod or vibation fork which make the item vibrate at its natural resonance frequency. When the measuring material hits the rod the vibrations stop and it sends a signal. download pdf datasheet

The ELT Vibrating level switch has piezo-electric crystalls inside the tuning rod or vibation fork which make the item vibrate at its natural resonance frequency. When the measuring material hits the rod the vibrations stop and it sends a signal. download pdf datasheet

The ELT 102 Tuning Fork Vibrating level switch has piezo-electric crystalls inside the vibation fork which make the item vibrate at its natural resonance frequency. When the measuring material hits the rod the vibrations stop and it sends a signal. download pdf datasheet

The DX-ELT vibrating switches used for level control with corrosive or viscous fluids, powders and solids. Both tuning forks and single rods work reliable with sticky media. Ex proof for hazardous areas. download pdf datasheet

E-TILT sensor is used vertically. It can be operated by battery and also it can be operated by providing the feeding. It can be ensured to stop the water leakage by commanding the relay outlet to a solenoid valve. Furthermore, it can benefit to take measure by attracting attention of the people in the ambient by sounding the siren. download pdf datasheet

Rotary Paddle Switches with ELF motor is used for level control in silos and tanks where materials with solid particles are stored.Full and empty signals can be received by performing level control in many demanding applications with different probe and pedal varieties in a safe manner.It can be connected horizontally and vertically download pdf datasheet

Reflex glasses are used for observing level in pressure tanks and high temperature liquids. download pdf datasheet

The EPS Pressure Switch is used for inline pressure measurement and control. download pdf datasheet

EPS compact design pressure switches can be mounted in tight spaces. The switches use a piston and diaphragm design which incorporates the high proof pressure of piston technology with the sensitivity of a diaphragm design. download pdf datasheet

ELO Optical Level Sensors consist of an infrared sensor and an optical receiver. Light from the sensor is broken by reflection from the prismatic surface and sensed by the receiving unit. Light return intensity changes according to air or liquid cover of the prismatic surface. The change is measured, calculated and triggers the switching outlet. It can be mounted from any angle to the tank, horizontal connection is recommended. It requires less maintenance and is not affected by conductivity or consistence of the liquid. download pdf datasheet

The ELW Radar Level Meters of Ensim Sensors 80 GHz series are excellent devices for non contact level measurement. The microwave impulses, emitted by the radar's antenna, travel at speed of light and a part of their energy, reflected by the surface of the medium to be measured, is received by the same antenna. The period of time (flying time) between the emission and the arrival of the impulses, is proportional to the existing distance between the antenna and the surface of the medium to be measured. download pdf datasheet

The ELW Radar Level Meters of Ensim Sensors 26 GHz series are excellent devices for non contact level measurement. The microwave impulses, emitted by the radar's antenna, travel at speed of light and a part of their energy, reflected by the surface of the medium to be measured, is received by the same antenna. The period of time (flying time) between the emission and the arrival of the impulses, is proportional to the existing distance between the antenna and the surface of the medium to be measured. download pdf datasheet

ELM Mini Level Switches are economic and easy to install devices with minimal space requirements. They are used for level measurement in machines, tanks, boilers, etc. for both liquids and gases. The Switches are made with stainless steel. download pdf datasheet

ELM Mini Level Switches are economic and easy to install devices with minimal space requirements. They are used for level measurement in machines, tanks, boilers, etc. for both liquids and gases. The Switches are made with different plastic materials: (PP, PVDF, PBT, Delrin) download pdf datasheet

ELG magnetic by-pass level indicators measure the liquid level by a float sensor with a magnet that turns the flaps on an indicating rail (top, bottom or side assembly). No electrical power needed. Options for high pressure (100 bar) and temperature (350°C) as well as aggressive media (PTFE lining). They can be supported with a transmitter and switch extensions. download pdf datasheet

Ensim ELD liquid level indicators are designed for machine manufactures to control the level of oil or other liquid outside of their vessels / tanks. They can be mounted horizontal or vertical and do not require electrical power. download pdf datasheet

High frequency microwave pulses are guided along a steel probe or rod that is submerged into the liquid or solid. The waves are then reflected as they hit the product surface and is sent back into the sensor. The flight time of the signal is calculated (between sending and detecting time), and is directly proportional to the level. download pdf datasheet

The EBQ Control Monitoring and Tracking device for Relay Control and Warning download pdf datasheet

EFS 81 thermal flow switches are an advanced flow switches that can withstand harsh conditions and are easy to install. When the sensor probe contacts with the flow in the pipe, the sensor detects the strength of the flow with temperature measurement and gives a contact outlet. It has 6 degrees that can be adjusted according to the flow strength. download pdf datasheet

The EFS 71 reciprocating flow switch provides high reliability flow control thanks to its design. It is divided into measurement fields according to the connection dimensions and the desired contact outlet can be set within this range.

EFS Paddle Flow Switches are used for the monitoring of liquid flow in pipes. When the liquid flow stops or starts its paddle actuates a microswitch (NO/NC) , hereby electrical equipment is protected .The flow switch is suitable to use all kinds of non-corrosive liquids. download pdf datasheet

EFS is used in order to check whether there is flow or not inside of pipe. In order to secure electrical equipment’s safety and return malfunction signal; flow switches are useful as they are providing open/close switches regarding the flow. Can be used with variety of liquids if not corrosive. Time delay is available with the help of a hand wheel while adjustment screw is set by default before delivery. Users can change according to their applications. of non-corrosive liquids. download pdf datasheet

The DX-EFSs high precision flowswitch from Ensim detects flow or no flow of water, lubricating oils, gases and aggressive media inside a pipe without the need of cooling the liquid: download pdf datasheet

EFS is used in order to check safely whether there is flow or not by detecting movement of liquids inside the pipe. It provides information about flow with high reliability without spending energy in cooling water or lubricating oil circuits, in the devices such as flash heater, central heating boiler and heater - 1/2" BSP, vertical assembly only download pdf datasheet

DX-ELB level switches are used for measuring and checking level of tank. lt is preferred in food, ship machine, boiler and storage tank applications with its advantages such as resistance to high temperature, long life contact structure, which is operable in each, vertical or horizontal connection. download pdf datasheet

DX-ELStx level transmitters are used for tank levels and for controls. The float moves according to the liquid in the pipe. The magnet in the float triggers electrical signals in the reed switch. download pdf datasheet

ELStx Level sensors are used for tank level and control.When magnetic field of magnet within the buoy moving along tube according to liquid level comes up to the reed sensor, it opens or closes the electric circuit. Continuous type serial aligned resistance and reed relays are engaged and disengaged. Such changes of reed sensors and alarm or level information can be assessed through a relay circuit or control device.Precision of reed sensor increases according to lowness of itsplacement range. It is preferred by the users due to the advantages of providing analogue output within the housing. Furthermore, Process control is possible in the field through UDS indicator. download pdf datasheet

DX-ELS ex-proof float level switches are used for tank level control.Different connections and material types are available. download pdf datasheet

ELS Level sensors are used for controlling level of a tank. Different kinds materials and housing connection types are available. download pdf datasheet

The EDS Digital Display (two-wire electrical connection) is designed to be mounted on the pressure, differantial pressure, flow, temperature andlevel transmitters. LCD Displays show, the value measured in the real-time and it will flash to alarm. The three button feature allows the user to program the zero, span, unit, decimal digits, damping and alarm point. download pdf datasheet

ELC level switches are used for checking liquid level of tanks and boilers. As it does not have any movable part, it can be used in the critical ambient and in the liquids with solid particle, low density and high viscosity. download pdf datasheet

ELC level switches are used for checking liquid level of tanks and boilers. As it does not have any movable part, it can be used in the critical ambient and in the liquids with solid particle, low density and high viscosity. download pdf datasheet

DX-ELC level switches mainly used in liquid level control of tanks and boilers. Using the advantage of not including a moving unit, DX-ELC is easy to use in critical areas, with solid particals, low density or high viscosity conductive liquid - explosion proof - multi point sensor download pdf datasheet

The ECAP 300 level transmitter is a capacitive level sensor for level measurement of solids and particle materials download pdf datasheet

The ECAP 200 level transmitter is a capacitive level sensor for level measurement of low conductive liquids download pdf datasheet

The ECAP 100 level transmitter is a capacitive level sensor for level measurement of conductive liquids download pdf datasheet

The DX-ECAP level transmitter is a capacitive level sensor for level measurement of conductive liquid, non-conductive liquid, granulated materials with solid particles, adhesive and acid/basic liquids download pdf datasheet

The ECAPr level transmitter is a capacitive level sensor for level measurement of conductive liquid, non-conductive liquid and acidic/basic liquids download pdf datasheet

The ECAS 100 level switch is a capacitive level sensor for level measurement of solids and particles download pdf datasheet

The ECAS 100 level switch is a capacitive level sensor for level measurement of non conductive liquids download pdf datasheet

The ECAS 100 level switch is a capacitive level sensor for level measurement of conductive liquids download pdf datasheet

The ECAM level switch is a capacitive level sensor for level measurement of conductive liquid and low conductive liquid. download pdf datasheet

The DX-ECAS level switch is a capacitive level sensor for level measurement of conductive liquid, non-conductive liquid, granulated materials with solid particles, adhesive and acid/basic liquids download pdf datasheet

ELA Cabled level switches are used for tank, depot, waste water plant level control in the industrial facilities. They operate without any problem in the this environment with its mechanical design and there is not any jam. Neoprene rubber cable is used for resistance against different liquids and in order that it does not crack in the hot-cold ambient. download pdf datasheet