Oval Wheel Meter OD
SKU: OD
Manufacturer: Bopp & Reuther Messtechnik
The focus is on the measurement of non-conductive liquids. This meter is designed for the measurement of e.g. oil or demineralized water. Due to the measuring principle, an inlet or outlet section is not required.
download pdf datasheet
download pdf datasheet
Characteristics
- direct measurement of volume
- measurement of non-conductive and conductive liquids
- high accuracy / repeatability also for small quantities
- high long-term stability
Special Features
- Fillings from 10 ml possible
- very short dosing times > 250ms
- high resolution (e.g. DN10: 2000 pulses/l)
- large selection of filling quantities with different nominal sizes
- can be combined with the batch controller
Technical data
| Nominal size | DN10,DN15,DN25 |
| Process connection | TriClamp according to DIN 32676 |
| Material |
Housing: stainless steel Oval wheels: stainless steel, PEEK Seals: EPDM, alternatively Viton |
| Flow Range |
0.2 l/min to 5 l/min – 2,000 Pulses/ (0.05 gal/min to 1.32 gal/min)l 1 l/min to 30 l/min – 1,000 Pulses/l (0.26 gal/min to 7.93 gal/min) 2 l/min to 50 l/min – 400 Pulses/l (0.53 gal/min to 13.21 gal/min) 4 l/min to 100 l/min – 200 Pulses/l |
| Accuracy | ±0,25% to ±0,5% |
| Repeatability | ±0,1% |
| Viscosity | 0,3 to 1.500 mPa·s |
| Process temperature |
Liquid temperature: -10°C to +130°C (-14°F to 266°F) ambient temperature: -20°C to +70°C (-4°F to 158°F) |
| Process pressure | max. 16 bar |
| Ex-protection |
not available |