Flap Flowmeter KLA
SKU: KLA Flap
Manufacturer: Kirchner & Tochter
The KLA Flowmeter uses a flap which is deflected by the flow of the medium. The deflection angle is a direct indication of the flow through the pipe. The flap is gravity-loaded, thus the device can be used for the flow directions left to right, right to left and bottom to top.
In the variant KLA-GS the medium be measured is directly visible through a glass in the flow indication unit.
download pdf datasheet
In the variant KLA-GS the medium be measured is directly visible through a glass in the flow indication unit.
download pdf datasheet
- robust device for a vertical and a horizontal installation
- suitable for measuring flows of e.g. H2O, oil or suspensions
- wide measuring range per nominal width
- low pressure loss
- designed for easy maintenance
- largely viscosity independent
- wide choice of material
Options: limit value switches, analogue output 4 - 20 mA, explosion-proof design, NR-lining for acids and alkaline solutions
| Connection: |
acc to DIN EN 1092-1 to 3, optionally: ANSI B16.5 150 lbs |
|
Pressure ranges: |
PN 10 (standard), in special design PN 6 |
|
Connection sizes: |
DN 15 – 200 / 1“ – 8“ |
| Material: | grey cast iron, opt. Stainless steel V4A, rubber lining |
|
Corrosion protection: |
Epoxy powder coating, traffic blue (RAL 5017) glossy |
|
Corrosion class C3 |
|
|
Rubber lining: |
NR-isoprene quality |
|
Temperature resistance: |
standard max. 100 °C |
|
with rubber lining max. 90 °C |
|
|
special design up to 150 °C |
|
|
Ambient temperature: |
max. 90 °C |
|
Measuring range: |
usu. 1:10 |
|
Uncertainty of measurement: |
5 % FS |
|
Degree of protection: |
following IP 54, switch IP 53 |